• 广告1
  • 广告2
  •  
  •  
ABOUT USSihai
Your present location:News
  • 产品名称: How to install an industrial belt
  • ID: n003

Turn off the power, cut the protective cover, and disengage the motor assembly bolts. The mobile motor makes the belt loose enough to remove the belt without prying open. Do not pry the belt down.

Remove the old belt and check for abnormal wear. Excessive wear may mean that there is a problem with the design or maintenance of the drive.

Choose the right belt replacement.

Clean the belt and pulley, should be wiped with a wiping the liquid is not easy to wipe the liquid, soaked in the detergent or use detergent to wash the belt are not desirable; to remove the oil and dirt, with sandpaper or scrap with a sharp object, Obviously not desirable. The belt must be kept dry before installation.