• 广告1
  • 广告2
  •  
  •  
PRODUCTSSihai
Your present location:Products >> Safety Precaution

Preparation

  • Please check the pulleys and make them aligned. Incorrect alignment may shorten the servie life of belts.
  • Please check the main components of pulley and lubricate the working parts periodically.
  • Please check the pulley grooves and make sure they are all equal in dimensitions.
  • Please check the pulley abrasion and remove any rust, dirt or grease that may inffuencew belt usage.
  • Please check the ventilation and ensure sound heat dissemination of the pulley and belt in operation.

Installation

  • Please locate the belt by moving the motor
  • Please pult belts onto the pulley one by one and locate the belts first one the driving pulley.
  • Do not use a lever to force the belt onto the pulleys but turning the pulley slowly can facilitate installation.
  • Apply tension to prevent slippage at full loading and run 5 minutes and re-tension. If necessary please readjust the tension after belts running a few days.
  • Do not combine to use new and used belts in one set that may shorten the belt life due to the unbalanced stretch of belts.